User avatar
mec1945
Corporal
Corporal
Posts: 39
Joined: Sat Dec 16, 2006 07:10
Location: Newman Lake, WA
Contact: Website

Chest MD #4 ~ Change of Plans!

Wed Apr 25, 2007 05:19

Forgive me as I may be a little slow on this. I'm looking in my MED3 book and in the back under the Medical Dept. Supply Catalog 1941, it list the Med #4 as 97575 and Chest MD #4 fits inside chest field plan # 97535, correct?? If so, to make one, I need a foot locker and build a Chest #4 to fit inside of it, correct? Or am I off base here?

Thanks!!
Last edited by mec1945 on Tue May 01, 2007 03:24, edited 1 time in total.
Nicholas Hopper
Helping to Keep Our Military History Alive!

User avatar
mec1945
Corporal
Corporal
Posts: 39
Joined: Sat Dec 16, 2006 07:10
Location: Newman Lake, WA
Contact: Website

Fri Apr 27, 2007 07:27

Well I must have confused you all with my question so I'll try this another way. My understanding is the Chest, MD #4 was designed to fit inside the Chest, field Plain, correct? If that is correct, I was thinking of taking a foot locker, making it a chest,field plain and building a Chest MD #4 to fit it. Does that sound acceptable or am I off base with my idea?

I have an interest in this chest because I have the folding table with canvas chairs already and would like to complete the 'kit' by having the MD #4 chest.

Thoughts on the idea????
Nicholas Hopper
Helping to Keep Our Military History Alive!

User avatar
Ben
Major
Major
Posts: 1304
Joined: Sun Nov 05, 2006 00:14
Real Name: Ben Major
Location: United Kingdom
Contact: Website

Fri Apr 27, 2007 12:11

Hi Nicholas,

You are indeed correct in thinking that the MD # 4 Chest fits inside the Chest, Field, Plain, Empty. As for converting a footlocker, I'm not sure how it could be done. Many of the footlockers that I have seen are lower than the Chest, Field, Plain and so converting one into a Med Chest could prove difficult.

I think that perhaps docdean is your best source for an answer on this, as he really does seem to know his stuff about the chests.

Hope that helps somewhat Nicholas, and do keep us posted on how the project materialises.

Many thanks,
Ben
Ben Major
MRC Administrator
ben@med-dept.com

1943 Harley-Davidson WLA
1943 Douglas C-47
1944 Cushman 53 Airborne Motor Scooter

dochoovie
Corporal
Corporal
Posts: 40
Joined: Sat Dec 16, 2006 15:40
Location: Lancaster, Pennsylvania, USA
Contact: Website

Fri Apr 27, 2007 16:53

If you allow, I'll second Ben's remark on the footlocker depth. I did a conversion of a footlocker into Med#1, and am fairly happy with it, however it is probably a good 6" shallower that it looks it should be. I'm working on the inserts for inside it, and I'm thinking man these aren't gonna be real big. I mean, it'll be good enough for me, and chances are 98% of the people who even bother to look at my med display won't know they're not "correct". Till I come across a couple nice #1s at the flea market for $15, they'll work for me. Maybe DocDean can give you a better idea of the dimensions of these real chests.

docdean64
Captain
Captain
Posts: 128
Joined: Tue Nov 07, 2006 15:41
Location: Austin, TX - U.S.A.

Sat Apr 28, 2007 03:23

Yes, the MD series of chests are shorter and taller than the footlockers are. I'll go out in the morning and measure one of the MD's for you. If the table set will fit in the chest though, I don't see a reason why you can't adapt a footlocker as a set though. As previously stated in another post who is going to know the difference as long as it looks right?!
MRC Moderator
"So Others May Live"

"Cursimus cum forfex"
“We Run With Scissors”

111th Med BN/ Re-enacted
33d Field Hospital/Re-enacted
1942 GPW Medical Jeep / Litter Carrier
1943 Converto T6 Trailer

User avatar
mec1945
Corporal
Corporal
Posts: 39
Joined: Sat Dec 16, 2006 07:10
Location: Newman Lake, WA
Contact: Website

Sat Apr 28, 2007 07:26

I have yet to come across a real chest so I figured I can make one for now so that I can have the set. I figure as long as none of you guys are around, no one around here would ever know!!! :P :P
Nicholas Hopper
Helping to Keep Our Military History Alive!

User avatar
mec1945
Corporal
Corporal
Posts: 39
Joined: Sat Dec 16, 2006 07:10
Location: Newman Lake, WA
Contact: Website

Sat Apr 28, 2007 08:07

Well I went out tonight and pulled the folding table out and a foot locker. The table will fit inside the lid of the footlocker no problem. The lid is about one inch to short so for the MD chest #4 to fit it will only be about 8 inches deep. What I can tell by the pictures in the MED3 book, it looks like the MD 4 is about 12 inches deep maybe a tad more.

Anyone have the measurements of the Chest MD #4 handy?

Thanks!
Nicholas Hopper
Helping to Keep Our Military History Alive!

docdean64
Captain
Captain
Posts: 128
Joined: Tue Nov 07, 2006 15:41
Location: Austin, TX - U.S.A.

Sun Apr 29, 2007 15:18

Okay, I have two of the MD series chests and both were measured with the same results they are as follows:

E X T E R I O R Measurements

29" long

15" tall

17" wide

Lid is 4" tall

The MD Series chests were all the same whether it was the MD1 or the MD 61 the only thing that changed about them were the contents / insert sets. Hope that helps.
MRC Moderator

"So Others May Live"



"Cursimus cum forfex"

“We Run With Scissors”



111th Med BN/ Re-enacted

33d Field Hospital/Re-enacted

1942 GPW Medical Jeep / Litter Carrier

1943 Converto T6 Trailer

User avatar
mec1945
Corporal
Corporal
Posts: 39
Joined: Sat Dec 16, 2006 07:10
Location: Newman Lake, WA
Contact: Website

Tue May 01, 2007 03:25

Okay guys, change of plans, instead I plan on building just the Chest MD #4 to original specs. Does anyone know the measurements of the MD #4? I have an idea of the length and width of the chest but not the depth of it.

Any ideas?

Thanks!
Nicholas Hopper
Helping to Keep Our Military History Alive!

User avatar
TenthA86
Captain
Captain
Posts: 389
Joined: Tue Dec 19, 2006 06:37
Real Name: David J. Little
Location: Denver, Colorado USA
Contact: Website

Tue Apr 22, 2008 03:02

I just got the desk insert for this - not the inner chest, though :-(

photos at http://www.med-dept.com/forum/viewtopic.php?p=1353#1353

LOL - I should have put a link on this post originally... so you could find it easily!
Last edited by TenthA86 on Thu Apr 24, 2008 04:35, edited 1 time in total.
David J. Little

President, Tenth Mountain Division Living History Display Group
Secretary, Tenth Mountain Division Foundation
Board Member, Tenth Mountain Resource Center
Past Webmaster, National Association of the Tenth Mountain Division

User avatar
mec1945
Corporal
Corporal
Posts: 39
Joined: Sat Dec 16, 2006 07:10
Location: Newman Lake, WA
Contact: Website

Thu Apr 24, 2008 04:20

I would love to see some photos of that David!
Nicholas Hopper
Helping to Keep Our Military History Alive!

User avatar
mec1945
Corporal
Corporal
Posts: 39
Joined: Sat Dec 16, 2006 07:10
Location: Newman Lake, WA
Contact: Website

Thu Apr 24, 2008 04:24

Sorry disregard last message, didn't see the other post
Nicholas Hopper
Helping to Keep Our Military History Alive!

Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 9 guests

 

cron